Custom IronWorks
Jozef | Request Estimate | Work Gallery | Articles | Encyclopedia | Contact Us

Mortise Lock

Encyclopedy Index

A mortise lock (also mortice lock in British English) is one that requires a pocket - the mortise - to be cut into the door or piece of furniture into which the lock is to be fitted. In most parts of the world, mortise locks are generally found on older buildings constructed before the advent of bored cylindrical locks, but they have recently become more common in commercial and upmarket residential construction in the United States.

The parts included in the typical mortise lock installation are the lock body (the part installed inside the mortise cut-out in the door); the lock trim (which may be selected from any number of designs of doorknobs, levers, handle sets and pulls); a strike plate, or a box keep, which lines the hole in the frame into which the bolt fits; and the keyed mortise cylinder which operates the locking/unlocking function of the lock body. However, in the United Kingdom, and certain other countries, most mortise locks on dwellings do not use cylinders, but have lever tumbler mechanisms.

The installation of a mortise lock cannot generally be undertaken by the average homeowner since it is labor intensive and requires a working knowledge of basic woodworking tools and methods. Many installation specialists use a mortising jig which makes precise cutting of the pocket a simple operation, but the subsequent installation of the external trim can still prove problematic if the installer is inexperienced.

Although the installation of a mortise lock actually weakens the structure of the typical timber door, a mortise lock does offer more versatility than a bored cylindrical lock, both in external trim, and functionality. Whereas the latter mechanism lacks the architecture required for ornate and solid-cast knobs and levers, the mortise lock can accommodate a heavier return spring and a more solid internal mechanism, making their use possible. Furthermore, a mortise lock will typically accept a wide range of other manufacturers' cylinders and accessories, allowing architectural conformity with lock hardware already on site.

Some of the most common manufacturers of mortise locks in the United States are Baldwin, Best, Corbin Russwin, Emtek, Falcon, Schlage, and Sargent. Also, many European manufacturers whose products had been restricted to "designer" installations have recently gained wider acceptance and use.


This article is licensed under the GNU Free Documentation License.
It uses material from the Wikipedia the free encyclopedia that anyone can edit.


Jozef | Work Gallery | Articles | Encyclopedia | Contact Us | Clientele

Jozef Custom IronWorks ™ - 2004 - 2008 All rights reserved.